Launch Wizard
Configure your token and presale in one flow — everything deploys in sequence automatically.
⚠ PLATFORM RULES
⚠ Contract addresses not configured. Edit CONTRACTS in the script.
✓ Calculator settings pre-filled
⬆ Fill in your token name and symbol above, then click Next through each step — everything else is already set.
1Token
2Project Info
3Presale
4Trust
5Review
Live preview
Total Supply
—
Token Rate
—
Price / Token
—
Implied FDV at Launch
—
Quick-Start Templates
Pick one to pre-fill the wizard, or configure manually below
🔥
Max Trust
100% LP burned + unsold burned. Zero team tokens. Cleanest possible launch.
100% LPBurn LPBurn unsold0% team
⚖️
Balanced Launch
90% LP locked 180 days, unsold locked, small team alloc, vesting.
90% LPLock LPLock unsold5% team
🐸
Meme Launch
100% LP burned, everything burned. Max deflation, community energy.
100% LPBurn LPBurn unsold0% team
🏢
Serious Project
90% LP locked 1 year, locked unsold, team tokens vested.
90% LPLock LPLock unsold10% team
Step 1 — Token Setup
Token Source
Token Type
Plain BEP20. Fixed supply, no fees. Best for utility or governance.
⛽ Gas note: This token type uses more complex smart contracts and requires a higher gas limit to deploy. The gas number in your wallet may look large (e.g. 5,000,000 units), but gas on BESC is nearly free — actual cost is fractions of a BESC. Do not manually lower the gas limit or your transaction may fail.
Token Identity
e.g. 1000000000 = 1 Billion
Buy Fees
Sell Fees
Buyback & Burn — External Token (optional)
ℹ How Buyback & Burn works
A percentage of each trade is set aside and periodically used to buy the specified external token on the DEX, which is then sent directly to the burn address (0x...dEaD). This creates constant buy pressure on the target token and permanently reduces its circulating supply.
This is separate from the regular Burn %, which burns your own token. Buyback targets a different token of your choice — for example, using your token's trading fees to buy and burn a partner project's token. The buyback token must have an active liquidity pair with BESC on the DEX.
A percentage of each trade is set aside and periodically used to buy the specified external token on the DEX, which is then sent directly to the burn address (0x...dEaD). This creates constant buy pressure on the target token and permanently reduces its circulating supply.
This is separate from the regular Burn %, which burns your own token. Buyback targets a different token of your choice — for example, using your token's trading fees to buy and burn a partner project's token. The buyback token must have an active liquidity pair with BESC on the DEX.
ℹ Liquidity requirement
Collected fees accumulate in the token contract and are automatically distributed (to LP, marketing wallet, and burn) once the liquidity pool reaches approximately $5,000 in depth. Until then, fees are held safely and will begin processing as soon as liquidity is sufficient. This ensures the auto-swap mechanism operates without excessive price impact.
Collected fees accumulate in the token contract and are automatically distributed (to LP, marketing wallet, and burn) once the liquidity pool reaches approximately $5,000 in depth. Until then, fees are held safely and will begin processing as soon as liquidity is sufficient. This ensures the auto-swap mechanism operates without excessive price impact.
Max Wallet & Max Transaction (optional)
Limit how many tokens one wallet can hold or buy/sell in a single transaction. Leave at 0 for no limit. Value is in % of total supply (e.g. 2 = 2%).
Reward Settings
💡 Suggested Reward Token
Click to use ↑
🚫 Blocked by platform.
ℹ️ Connect wallet to see your fee limits
Buy Fees
Sell Fees
Buyback & Burn — External Token (optional)
ℹ How Buyback & Burn works
A percentage of each trade is set aside and periodically used to buy the specified external token on the DEX, which is then sent directly to the burn address (0x...dEaD). This creates constant buy pressure on the target token and permanently reduces its circulating supply.
This is separate from the regular Burn %, which burns your own token. Buyback targets a different token of your choice. The buyback token must have an active liquidity pair with BESC on the DEX.
A percentage of each trade is set aside and periodically used to buy the specified external token on the DEX, which is then sent directly to the burn address (0x...dEaD). This creates constant buy pressure on the target token and permanently reduces its circulating supply.
This is separate from the regular Burn %, which burns your own token. Buyback targets a different token of your choice. The buyback token must have an active liquidity pair with BESC on the DEX.
ℹ Liquidity requirement
Collected fees — including holder rewards, LP contributions, and marketing — accumulate in the token contract and are automatically distributed once the liquidity pool reaches approximately $10,000 in depth. Until then, fees are held safely and will begin processing as soon as liquidity is sufficient. This ensures the auto-swap and reward distribution mechanisms operate without excessive price impact.
Collected fees — including holder rewards, LP contributions, and marketing — accumulate in the token contract and are automatically distributed once the liquidity pool reaches approximately $10,000 in depth. Until then, fees are held safely and will begin processing as soon as liquidity is sufficient. This ensures the auto-swap and reward distribution mechanisms operate without excessive price impact.
Max Wallet & Max Transaction (optional)
Limit how many tokens one wallet can hold or buy/sell in a single transaction. Leave at 0 for no limit. Value is in % of total supply (e.g. 2 = 2%).
Your Token Address
Step 2 — Project Info & Socials
Project Identity
Displayed on presale cards. Use your project/brand name, not the token name.
Must be a direct image link ending in .png/.jpg/.gif. Shown as thumbnail on cards.
Drag to reposition
Must be a direct image link. Recommended 1200×400px. Shown at the top of the presale card.
Preview — drag banner to reposition
?
Project Name
TOKEN · 0x000…0000
0 BESC raised45%
Range: 0–90%. Must match how much of supply you keep.
Declare how many tokens you are keeping for yourself and the team.
Whole numbers only (0, 1, 2… 90). This is shown publicly on your presale so participants know upfront. Keeping 0% is the strongest trust signal.
Social Links (all optional)
Social links are stored publicly on-chain and visible on your presale page. You can update them anytime before finalization.
Step 3 — Presale Configuration
Liquidity Pool Currency
Approved by the platform. Stable tokens (USD-pegged) recommended unless you understand the risk of volatile pairs.
How many LP token equal 1 BESC. Locked at creation; used to count BESC contributions toward the cap. Auto-fills from DEX when you pick a token.
⚠ Volatile LP Token
This token is marked as volatile by the platform. The value of your liquidity pool will move with this token's price:
- If the token's price drops, your LP value drops with it
- Caps and contributions are denominated in this token's units, not USD
- Migration claimants holding this LP get a position that reflects token volatility
Presale Caps (BESC)
If not hit by end time → full refund to all participants
Must be ≥ soft cap
Per-Wallet Limits (BESC)
Min: 0.001 BESC
Must be ≥ min and ≤ hard cap
Token Distribution
How much of your token supply is available in this presale. The rest goes to LP + unsold handling.
Timeline
Your local time (). Set a few minutes ahead to allow for transaction time.
Min 1 hour, max 30 days
Liquidity
Range: 10–100%. 90%+ recommended for investor confidence. Platform fee is deducted first.
Step 4 — Trust Settings & Vesting
🛡 Trust Signals
LP Token Safety (REQUIRED)
Choose how LP tokens are handled after finalization. Both options permanently protect liquidity — unlocked LP is not allowed.
Minimum 180 days. Longer lock = stronger trust signal for investors.
⚠ BURN is permanent and irreversible — liquidity can never be removed. LOCK releases LP to the creator after the lock period expires.
🔒 Auto-LP from fees: If your token has a liquidity fee, any LP tokens generated from ongoing trading fees are automatically sent to the burn address (0x...dEaD). This is a standard safety feature to prevent LP accumulation after launch.
⚠ PERMANENT — You will NEVER be able to change any contract settings after this. No exceptions.
Token Vesting
Tokens unlock in equal portions each period. Cliff = mandatory wait before first unlock.
4 periods = 25% per period
Instant — participants can claim 100% immediately after finalization.
🪙 What happens to unsold / unallocated tokens?
After finalization, any tokens not sold and not sent to LP are routed based on your choice below. This is one of the most important trust signals — participants can see your choice on your presale card.
↩ Return to creator Partner only
Unsold tokens are sent back to your wallet at finalization. You can use them for future listings, airdrops, or team allocation. Participants can see this — lower trust signal.
🔥 Burn all unsold tokens Default — Strongest signal
Unsold tokens are permanently sent to the dead address. Total supply shrinks — every holder gets a larger share. Cannot be undone.
🔒 Auto-lock unsold tokens Strong signal
Unsold tokens are locked in the Token Locker contract for 180 days automatically at finalization. You cannot access them until the lock expires.
⚠ PERMANENT — Burned tokens are gone forever and cannot be recovered by anyone.
💎 Staking Pool (Optional)
Allocate a portion of your token supply to a staking pool. Holders can stake your token to earn rewards. Tokens go directly to the staking pool at finalization — you never touch them. This is a strong trust signal.
% of total supply dedicated to staking rewards
How long rewards are distributed
How it works: At presale finalization, these tokens are sent directly to a staking pool contract — never to your wallet. Stakers earn rewards proportional to their stake. You can top up the pool later with additional tokens. Note: staking allocation + team allocation + presale must total ≤ 100%.
Step 5 — Review & Launch
DISCLAIMER & AGREEMENT
By launching this project on BESC Pad, you acknowledge and agree to the following:
•BESC Pad provides infrastructure only. The platform operators are not liable for any loss of funds, failed transactions, smart contract errors, token depreciation, or any other direct or indirect damages.
•You are solely responsible for your token, its configuration, and all outcomes of your presale.
•All blockchain transactions are irreversible. Double-check all settings before proceeding.
•The platform does not provide financial, legal, or investment advice.
•VIP Early Access: This platform grants VIP holders early access to contribute to presales before the general public. By launching here, you agree that VIP holders will have early contribution access to your presale during the VIP window.
•You have read and understood the FAQ & Terms of Use.
ℹ️ You only pay standard network gas for each transaction. Your wallet will ask you to sign and confirm each step before it executes.